ChamSys MagicQ Manual de inicio rápido descargar pdf (Pagina 14)

www.chamsys.co.uk MagicQ Software Quick Start

14 of 44

Using network protocols Art-Net / ACN / Pathport.

Change the Output Type to Art-Net, ACN or Pathport. All 18 universes can be enabled.

Choose which Art-Net / ACN / Pathport Universe you wish to output on each MagicQ Universe in the Out Uni field.

MagicQ defaults to outputing MagicQ universe 1 on the first Art-Net Universe (Art 0).

In order to use network protocols the network port of your PC must be set up with an IP address and subnet allowed by

the required network protocol. For example, for Art-Net the IP address must be in the range 2.x.x.x with subnet mask

255.0.0.0. In MagicQ you must configure the network settings so that MagicQ knows which network port on your

computer to use. In Setup, View Settings, Network set the IP Address and Subnet mask fields to match those of your

network interface.

Using Entec or other 3

party interfaces

MagicQ supports many different 3

party interfaces such as the Entec Pro. Connect the interface and set Universe 1 to

the appropriate type.

Only Universe 1 can be used for 3

party interfaces.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Sin comentarios

ChamSys MagicQ Manual de inicio rápido Pagina 14