ChamSys MagicQ Manual de inicio rápido descargar pdf (Pagina 43)

www.chamsys.co.uk MagicQ Software Quick Start

43 of 44

Tutorial 6 : Recording a Cue and a Cue Stack

This tutorial will show you how to record a Cue and a Cue Stack (sequence of Cues).

• Start up MagicQ software. The “Welcome to MagicQ” window should be shown. Chose the “Lighting Demo”

option.

• If the “Welome to MagicQ” window does not appear then press the Setup button (towards the top right). Then

press the top soft button View Settings. Then press Load Show, and confirm Yes when requested to erase the old

show from memory. Choose the Capture.shw show.

• First we will create a simple “look” in the Programmer. Press Layout 1 to open the Group, Position, Colour and

Beam Windows.

• In the Group Window select the “All Mac250” Group.

• In the Colour Window select colour “Yellow” and in the Position Window select “Down”.

• In order to program a new Cue we need to find a Playback page with free Playbacks. Press the Page Up / Page

Down buttons to change Page to Page 3. The Page number is shown to the left of the clock.

• To record a Cue press the REC button (in the action buttons on the left side) and then press the S button above the

first Playback (PB1)

• MagicQ records the Cue on the Playback. As the Playback was empty, MagicQ automatically creates a Cue Stack

with the single cue in it. The cue is given the Cue ID 1.00 with the Cue Stack.

1 2 ... 38 39 40 41 42 43 44

Sin comentarios

ChamSys MagicQ Manual de inicio rápido Pagina 43