ChamSys MagicQ Manual de usuario Pagina 116
- Pagina / 139
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 116 Version 1.3.0.0
WING1 PB1 GO and WING1 PB1 FLASH are provided as an alternative to the current playback GO
and FLASH. This allows, for example, a smoke machine to be set up on WING1 PB1 trigger by the
remote input.
18.4 Sound to light (audio input)
Sound to light operation is supported on MagicQ PC when connected to a MagicQ PC Wing.
In the Setup Window set the Audio Input to “Sound to Light”. Set the Audio Trigger Level to the level
of the music between 0 and 255.
Sound to light can be used in two ways; to bump a Cue Stack from step to step, and to set the virtual
level of the playback fader. Configure the “Audio Controls Fader Level” and the “Audio bumps GO”
in the View Options view of the Cue Stack window.
When used to control the fader level, the fader can be configured to control HTP level, LTP level, FX
size or FX speed thus giving many possible sound activated FX.
19 Using Multiple Consoles
19.1 Hot take-over
Hot take-over allows the use of multiple consoles in case a console stops working. Hot take-over can
be used in two ways - depending on what you wish to happen when the main console becomes available
again.
In “Single mode” only one of the consoles (or MagicQ PCs) on the network is designated as a back up.
All the universes on the console are set to “Hot take-over”. Whenever there is no ArtNet traffic on the
network for a particular universe, the back-up console starts sending data for that universe. As soon as
data reappears, the back-up console stops sending data.
In “Multiple mode” all consoles on the network are set to “Hot take-over”. At any one time, one of the
consoles will run as the master, with all universes enabled. If that console fails, one of the others will
take over. It is recommended that you set the “Hot take-over detect time” to different values on each of
the consoles to avoid conflict conditions.
A console that is set to “Hot take-over” can be forced to control all universes using the “TAKE
CONTROL” soft button. This will force an immediate change of control from one console to the other.
Similarly, control can be given to another console using the “RELEASE CONTROL” soft button. This
will force the other console to take control, and depending on the hot take-over options will enable a
controlled fade to the new console outputs.
Set up the type of hot take-over, the detect time, and the fade time in the View Settings view of the
Setup Window. Set up the universes to be controlled by hot take-over in the View DMX I/O view of the
Setup Window.
Universes that are set to “Hot take-over”, monitor the network for ArtNet traffic on that universe. If no
ArtNet traffic is detected for longer than the “Hot take-over detect time” then the universe will be
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.es. Todos los derechos reservados | 0.072 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales