ChamSys MagicQ Manual de usuario descargar pdf (Pagina 38)

ChamSys Ltd www.chamsys.co.uk

MagicQ User Manual 38 Version 1.3.0.0

The console supports theatre style key entry – so you can set head 1 to 40% by typing

1 @ 4 ENTER

and you can set head 1 to 4% by typing

1 @ .4 ENTER or 1 @ 04

Note that if the "Auto enter on keypad intensity set" option is set, you do not need to press ENTER after

you have entered a 2 digit level. The console knows that you are setting an intensity due to the @ key.

Valid levels are 0% to 100%.

On MagicQ PC you can use > to indicate THRU and # to indicate FULL.

6.3.1 Setting fade times from the keypad

Fade times for intensity channels can be entered from the keypad. This can be done when setting

levels, e.g. to set heads 1 to 4 at 80% with fade time of 5 seconds:

1>4@80/5

Or without changing the level

1>4@/5

To set a delay time and a fade time (e.g. delay 2 seconds, fade 5 seconds)

1>4@/2/5

Ensure that “Auto Enter on Keypad Intensity Set” is set to “No” for this to function correctly.

6.4 Using Selected Heads

When you use the keypad to modify heads, by default this does not modify which heads are selected. This

ensures that you can be busking moving heads whilst modifying individual dimmer levels at the same time.

However, at any time you can set the levels of the intensities of the currently selected heads using the

keypad. To set the selected heads to 70% key in:

@ 70

This method also supports standard key entry syntax such as + and – for relative changes.

You can change which heads are selected at any time either through the Group Window – see Selecting

Heads.

In the Intensities Window you can change which heads are selected by moving the cursor to a fader and

pressing ENTER. You can also select/deselect heads by holding down SHIFT and selecting faders. When

faders are shown with a thick stem they are selected. Holding SHIFT and pressing the fader toggles the

selection of the fader.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 138 139

Sin comentarios

ChamSys MagicQ Manual de usuario Pagina 38