ChamSys MagicQ Manual de usuario Pagina 71
- Pagina / 139
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 71 Version 1.3.0.0
The top right encoder is used to select which Page of playbacks is displayed. This is completely
separate from the Page used for the physical playbacks. Thus you can have the physical playbacks set
to one page whilst you view and modify playbacks on a different page.
Cues can be recorded onto any of the playbacks in the same way as they are recorded onto a real
playback. After pressing RECORD, instead of selecting a playback SELECT button, just press the
appropriate button in the Playbacks Window.
10.5.1 Testing playbacks
Any playback can be tested, by pressing the appropriate button in the Playbacks Window. This has the
same effect as raising the physical fader from zero to full. Pressing the button again sets the fader back
to zero. We will refer to this as a virtual playback.
You can use physical playbacks and virtual playbacks simultaneously - however if you activate a virtual
playback for an active physical playback then the result will depend on whether the physical playback
and the virtual playback are on the same page. If they are, then the effect will be that the playback will
be activated and set to the highest level of the physical playback and the virtual playback. If not, then
the physical playback will not be affected and the virtual playback will be ignored. This is because only
one Cue Stack can be run on a playback.
Use the View Faders soft button to change the view in the Playbacks Window into faders rather than
buttons. Faders can then be moved up and down using the touch screen / mouse. This enables full
control of virtual playbacks. The GO, PAUSE and RELEASE soft buttons enable immediate control of
virtual playbacks.
You can select a virtual playback as the currently selected playback by pressing the SELECT button
and then pressing the required virtual playback in the Playbacks Window. This enables the Cue Stack
from the virtual playback to be controlled, including the modification of Cues and Cue Stack
parameters.
10.5.2 Naming playbacks
Playbacks can be named in the Playbacks Window as per naming of any Windows item.
10.5.3 Copying and moving playbacks
Playbacks can be moved and copied in the Playbacks Window just like any Window item. You can
also change the Playback Window page between selecting the source and destination, so that you can
copy or move between pages.
When a Playback is copied to another Playback, the Cue Stack on the source playback is copied (i.e. a
new Cue Stack is generated) to the destination Playback. By default, the Cues that make up the Cue
Stack are not copied - both Cue Stacks reference the same Cues. This means, for example, that you can
generate several copies of a chase, each with the same Cues but with different chase speeds.
You can force an unlinked copy of Cue Stacks by holding SHIFT down when you press the COPY
button. This forces both the Cue Stack and its Cues to be copied.
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.es. Todos los derechos reservados | 0.043 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales