ChamSys MagicQ Manual de usuario Pagina 70
- Pagina / 139
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 70 Version 1.3.0.0
using the FLASH button. The manual section simply provides extra control features above those
available on each of the playbacks.
The GO and STOP buttons in the manual section have the same function as the GO and STOP buttons
on each playback. The FWD and BKWD buttons move through the Cue stack without fading. The
extra large GO button below the Manual Fader is designed for theatre style playback and has the same
function as the GO button on each playback.
The Manual Fader is unlike all the other faders in that it controls the progress of the current CUE rather
than the HTP level of the Cue Stack. This enables a Cue to be manually faded, the level of the Manual
Fader representing the % of the fade that is complete - from 0% to 100%.
The Manual Fader enables you to in a Cue Stack. To start a manual cross-fade, hold the SELECT
button for the playback and move the cross-fader. The display window will show "pickup" until the
cross-fader level matches the current position in the fade - it will then change to "manual". You can also
start a manual cross-fade on the currently selected playback by holding SHIFT and moving the cross-
fader.
As the fader reaches the limits the Cue Stack moves to the next Cue.
10.4.7 Manual Split Cross-fade
Two faders may be assigned as theatre style split cross-fade masters.
When enabled from the Setup Window, playbacks faders 9 and 10 become Xfade Masters for manual
Fade In and Fade Out. Pressing the Pause button on either playback 9 or 10 brings the current playback
under manual control.
The two faders can then be used to fade in each new Cue with separate control for fade in and fade out.
Pressing the Go button on either Playback 9 or 10 returns the current playback to normal Cue execution.
When enabled, playbacks faders 9 and 10 can not be used as normal playbacks.
10.4.8 Rate sub-master
It is possible in the Setup Window to set the function of manual cross-fade fader to be a rate sub-master
to control the execution rate of the current playback, or the exution rate of all playbacks. The rate is
shown in the bottom right of the status window from 0% to infinity. The fader should be set to 50% for
normal execution rate.
10.5 Playbacks Window
The Playbacks Window enables management of all 202 playbacks regardless of how many physical
wings are attached. This ensures that shows that will be run on consoles with wings can be
programmed on a PC with no wings. It also provides an ideal way of expanding your show control by
using virtual playbacks.
The Playbacks Window displays a button for each of the 202 playbacks - starting with the 10 main
playbacks and then with 8 wings each with 24 playbacks.
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.es. Todos los derechos reservados | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales