ChamSys MagicQ Manual de usuario Pagina 82
- Pagina / 139
- Tabla de contenidos
- SOLUCIÓN DE PROBLEMAS
- MARCADORES
Valorado. / 5. Basado en revisión del cliente
ChamSys Ltd www.chamsys.co.uk
MagicQ User Manual 82 Version 1.3.0.0
12.14 Using shows on different MagicQ products and show versions
In general MagicQ show files are backwards and forwards compatible. Thus you can load any show
into any version of software. Loading shows created and modified on newer software versions into
older software versions may result in some features not being supported or not working exactly as
expected.
In March 2006 new MagicQ consoles were changed from 6 universes to 12 universes. MagicQ
software version v1.2.5.4 and above supports 12 universes.
12.14.1 Configuring 12 Universes
To enable 12 universes, go to Setup Window and VIEW DMX I/O and select “SET 12 UNIVERSES”
soft button. It is necessary to restart MagicQ before the changes take effect. To go back to 12
universes, select the “SET 6 UNIVERSES” soft button.
Show files are compatible – except that it is not possible to load a show using all 12 universes (i.e. that
has channels patched to universes 7 to 12) into a console set to support 6 universes.
Shows that only use universes 1 to 6 can to be loaded into consoles set to either 6 or 12 universes.
MagicQ MQ100, MQ200, MQ300 consoles purchased before March 2006 require a hardware upgrade
to safely run 12 universes – this increases the processor power to guarantee performance. MagicQ
MQ50 supports only 6 universes.
MagicQ PC can support 12 universes – performance will depend upon the specification of the PC.
Latest PCs can easily support 12 universes fully loaded.
- MagicQ User Manual 1
- ChamSys Ltd 2
- TABLE OF CONTENTS 3
- 1 Introduction 10
- 2 Console Concepts 12
- 2.3 Cues 13
- 2.4 Cue Stacks 13
- 2.5 Playbacks 14
- 2.6 Pages 14
- 2.8 Window layouts 15
- 2.9 Shift Functions 15
- 2.10 The Programmer 15
- 2.11 Help 15
- 3 Quick Start 16
- 3.7 Selecting Heads 17
- 3.8 Recording a Group 18
- 3.9 Naming a Group 18
- 3.10 Recalling a Group 18
- 3.11 Locating Heads 18
- 3.12 Modifying Attributes 19
- 3.13 Recording a Palette 19
- 3.14 Adding in FX 20
- 3.15 Recording a Cue 20
- 3.17 Playing back your show 21
- 4 Console Layout 22
- 4.2 Playback Area 23
- 4.3 Head Control Area 24
- 4.4 Editor Area 24
- 4.5 Windows Select Area 25
- Common Actions 27
- 4.9 Moving items 28
- 4.10 Copying items 28
- 4.11 Removing items 28
- 4.12 Recording items 29
- 4.13 Actions on Playbacks 29
- 5 Patching 30
- 5.5 Head names and numbers 31
- 5.6 Gel name and number 32
- 5.7 Generating auto groups 32
- 5.8 Inverting and Swapping 32
- 5.10 Dimmer curves 33
- 5.14 Morphing heads 34
- 5.15 Importing heads 34
- 5.16 Exporting heads 35
- 5.18 Merging with DMX input 35
- 6 Setting Dimmer levels 37
- 6.4 Using Selected Heads 38
- 6.8 Selecting Heads 41
- 6.9 Using Groups 41
- 6.12 Locating Heads 43
- 6.13 Modifying Attributes 43
- 6.14 Flip 44
- 6.15 Copy between heads 45
- 6.16 Head Macros 45
- 6.18 Adding in FX 47
- 7 Palettes 51
- 7.3 Naming Palettes 52
- 7.4 Updating Palettes 52
- 8 Programmer 56
- 8.4 Recording a Cue 57
- 8.5 Record Options 58
- 8.6 Removing channels 59
- 8.7 Blind programming 59
- 8.9 Editing Cues 60
- 8.12 Snapshot 60
- 9 Cue Stacks 61
- 9.3 Cue Timing 62
- 9.4 Tracking 63
- 9.7 Copying and Moving Cues 65
- 10 Playback 66
- 10.1 Playback Display 67
- 10.3 Fader control 67
- 10.4 Playback Buttons 68
- 10.5 Playbacks Window 70
- 10.7 Default Cue Stacks 72
- 10.8 Group Masters 72
- 10.6 Wing Playbacks Pages 72
- 10.9 Playback Stomping 73
- 10.10 Playback priority 73
- 11.2 Over-ride / take-over 74
- 11.5 Modifying FX parameters 75
- 11.9 Adding in new FX 76
- 11.12 Busking Master 77
- 12 System Management 78
- 12.5 Loading Shows 79
- 12.6 Erasing 79
- 12.9 File Manager 80
- 12.11 Status Window 81
- 12.12 Editing Heads 81
- 12.13 Backup Archives 81
- 13 Settings 83
- 13.3 Wing Settings 84
- 13.4 Security settings 85
- 13.5 Programming settings 86
- 13.6 Playback Settings 89
- 13.7 General Settings 90
- 13.8 Cue Storage Settings 91
- 13.9 Interface Settings 91
- 13.10 Port Settings 92
- 13.12 Hardware Settings 93
- 13.16 LED brightness 95
- 13.17 Locking the console 95
- 13.18 Button test mode 95
- 14 Advanced Programming 97
- 14.4 HTP handling 98
- 14.5 LTP handling 99
- 14.6 Creating rig plans 99
- 14.7 Time-code support 100
- 14.8 Scheduled Events 100
- 15 MagicQ Multi Windows 101
- 16 Head Editor 101
- 16.1 General View 102
- 16.2 Channels View 103
- 16.3 Ranges View 104
- 16.4 Palettes View 105
- 16.5 Macros View 106
- 17.1 Patching LED on MagicQ 106
- 17.5 Using bitmaps 108
- 17.6 Using text strings 109
- 18 External Interfaces 111
- 18.3 Remote trigger input 114
- 19 Using Multiple Consoles 116
- 20 Execute Window 118
- 21 Media Servers 120
- 21.3 Live previews 121
- 21.4 Media layer selection 121
- 22 The MagicQ At A Glance 123
- 23 Troubleshooting 124
- 24 Button Functions 125
- 25 Licensing 136
- 26 Glossary 137
© 2020, manymanuals.es. Todos los derechos reservados | 0.105 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentarios a estos manuales